Jimmy Egypt & Sons
KNA VV-Wi Bridge Mounted Passive Piezo Pickup with Onboard Volume Control and Built-In Wireless Compatibility for Violin/Viola
KNA VV-Wi Bridge Mounted Passive Piezo Pickup with Onboard Volume Control and Built-In Wireless Compatibility for Violin/Viola

KNA VV-Wi Bridge Mounted Passive Piezo Pickup with Onboard Volume Control and Built-In Wireless Compatibility for Violin/Viola

RRP £149.00
Our Price £139.00
Saving Of
£10.00
Available to Order
  • Integrated wireless system KNA VV-Wi incorporates a wireless signal transmission for a reliable, stable and cable-free connection to an amplifier, mixer or audio interface. The built-in UHF transmitter offers performers a high-fidelity sound with the ability to move around the stage freely. 
  • Optional wired connection For the studio or other times when a wireless connection isn’t needed, VV-Wi plugs in with a regular 1/8″ audio cable.   
  • Safe install Mount the pickup jack housing on the lower bout, just below the waist on the 4th (G) string side of your instrument. Adjust the height of the barrel clamps to tighten the pickup to the instrument.
  • Onboard volume control Players can control their output signal onstage or in the studio by clicking the onboard "+" and “-“ buttons. 
  • Wooden transmitter housing and sensor The transmitter housing is encased in laminate birch with an elegant and stylish mahogany top. The piezo sensor has a lightweight wooden casing to achieve maximum tonal sensitivity. 
  • Natural sound VV-Wi has a passive piezo design that reproduces the instrument's authentic voice.
  • Protection for your instruments finish The adjustable clamps have protective padding at each point of contact to prevent damage to your instrument’s finish. 
  • Great compatibility with many sizes of violin and viola The pickup comes with universal size barrels to attach the jack housing equally well to both violin and viola bodies with just a few turns.
Product Description

KNA's innovative approach enables violin and viola players to have freedom of movement while bringing the natural tone of their instrument to an amplifier or mixer. The system includes a rechargeable transmitter and receiver, and everything needed to plug in and play.

KNA Pickups are dedicated to providing acoustic musicians with natural-sounding, natural-looking means to amplify their instruments. KNA’s mission bridges the traditions of Old World artisans with the innovation of modern musicians they serve. Each KNA pickup is handcrafted in Europe using the fine components and tonewoods usually reserved for instruments themselves. 

In KNA’s full range of pickup solutions, they offer several designs to assure players get the best sound possible for their application. The piezo, magnetic, passive, and active pickups offer natural sound reproduction tailored specifically for the tonal and dynamic range of each instrument. KNA offer universal pickups that will work for nearly any instrument with a flat surface where the transducer can be placed, and popular models for nylon- and steel-string guitar, ukulele, banjo, bouzouki, violin, viola, cello and double bass. Each is crafted to offer the most authentic sound possible, with an easy installation that requires little or no modification to the instrument.  

Always encased in well-finished tonewood, KNA pickups distinguish themselves with superior fit, finish and sonic response.

Specification
Specifications  
Weight 45gr / 1.6oz
Wood Laminate birch and mahogany top
Maximum Impedance 1500 Ω
Potentiometer 500 kΩ
Parameters
UHF Frequency 550 Mhz-589 Mhz
Audio Sampling rate 48 Khz
Frequency Response 20-20 Khz
Performance Time Approx. 6 hours
Internal Power Supply Polymer lithium-ion battery
Wireless Range 50M line of sight
Measurements
Specified part Letter Size in MM (from*) Size in MM (to*) Size in INCH (from*) Size in INCH (to*)
Pickup sensor side diameter a 12,0 12,1 0,472 0,476
Pickup sensor side diameter b 12,0 12,1 0,472 0,476
Pickup sensor side diameter with extension c 12,7  12,8 0,500 0,504
Lead wire length d 135,0 - 5,315 -
Jack housing width e 33,0 33,1 1,299 1,303
Mounting bracket and 23mm barrel tightened  f 31,0 31,1 1,220 1,224
Jack housing height g 14,0 14,1 0,551 0,555
Mounting bracket and 29mm barrel untightened  h 51,0 51.1 2,008 2,012
Pickup sensor thickness i 1,9 2,0 0,073 0,079
Jack housing length j

70,0

- 2,756 0,000
*KNA handmade pickups may vary slightly in size due to the nature of the building
More Info

Model
KNA-VV-WI
Part Number
KNA-VV-WI
Filter by Brand
KNA Pickups
Stock Availability
Out of Stock
Pickup Type
Piezo Contact Transducer

Customer Reviews (0)

Be the first to Write a Review for this item!